MIL-A-18001H

Mil-Spec Zinc Alloy A-18001H
MIL-A-18001H Mil-Spec Zinc Alloy

Mil-Spec Zinc Alloy A-18001H / MIL-A-18001H

MIL-A-18001H have stable electrochemical properties and are used in seawater or in water resistivity up to 1000 ohm-cm. MIL-18001-H Zinc anodes should not be used where environmental temperature may exceed 50°C.

MIL-A-18001H alloy and seawater type zinc anodes are available in a wide variety of sizes and shapes.
Anodes used in soil usually have a galvanized mild steel rod core. This core is attached to the anode cable during installation of the anode.
In both fresh water and seawater applications the anode is often attached directly to the structure to be protected by welding or bolting the steel rod, pipe, or strap core to the structure.

Typical uses of Mil-Spec zinc in seawater or salt mud

MIL-A-18001H alloy and seawater type zinc anodes available in a wide variety of sizes and shapes

• Anodes used in soil usually have a galvanized mild steel bar core
• This core is attached to the anode cable during the assembly of the anode
• In both freshwater and seawater applications, the anode is usually directly attached to the structure to be protected by welding or bolting a steel bar, pipe or belt core to the structure

MIL-A-18001H Chemical Analysis

Analysis  ( %) MIL-A-18001H
Al 0.1 – 0.5
Cu ≤0.005
Mg –
Pb ≤0.006
Fe ≤0.005
Cd 0.025 – 0.15
Sn –
Si –
Ni –

Package

Ingot Weight 7 – 9 kg
Ingot Size ( W x L x H ) 12 x 49 x 3 cm
Packing Weight

Zinc Alloy Feet

 900 – 1200 Kg
Bundle Size ( W x L x H )

Zinc Alloy Feet

 50 x 100 x 60 cm
Packing Weight

Euro Pallet

 1500 – 2000 Kg
Pallet Size ( W x L x H )

Euro Pallet

  80  x 120 x 150 cm

Payment

Payment Terms 100% TT ( 30% deposit + 70% before loading )

LC and CAD not accepted
Price  LME + premium

 LME Price will be confirmed after the deposit payment has been confirmed.

For LME official closing price quotation , customer must send information until 2 hours ago before LME closing

After LME price fix, No Change
Price Terms
  1. We prepare pro invoice and customer pay deposit
  2. We produce order in our factory(+- 300kg)
  3. Customer must quote (fix) LME price until loading
  4. We prepare final pro invoice (Net weight and LME price)
  5. Customer pay balance amount.
  6. Customer transport agency can pick up order from our factory for EXW

 

Delivery

Origin Turkey ( Our production )
Min Order 2 tons
Our Factory Location Kocaeli / Turkey
Delivery Time Depends of quantity
Sea Freight Ports Near Our Factory Evyap Port  / Yilport  /  DPworld Port
Back To Top